What are the Types of Firewalls

A firewall is a security device that screens network traffic. It defends the internal network by filtering incoming and outgoing traffic according to defined rules. Setting up types of firewalls is the easiest way to add a layer of security between a system and malicious attacks.

How does a Firewall Work?

A firewall is placed at the hardware or software level of a system to protect it from malicious traffic. Depending on the configuration, a single computer or an entire computer network can defend. The device checks incoming and outgoing data traffic according to predefined rules.

Internet communication takes place by requesting and transmitting data from a sender to a recipient. Since the data can’t send as a whole, it is broken down into manageable data packets that make up the entity transmitted initially. The part of the firewall is to examine the data packets that are sent to and from the host.

What does a Firewall Review?

Every information bundle comprises a header (control data) and a payload (the real information). The title contains data about the sender and beneficiary. Before the bundle can enter the internal organization through the characterized port, it must pass the firewall. This transmission relies upon the data it contains and how it adjusts to the predefined rules.

For example, the firewall might have a rule that blocks traffic from a specific IP address. If data packets with this IP address received in the header, the firewall denies access. A firewall can also restrict access to everyone except defined trusted sources. There are many ways to configure this security device. The degree of protection of the system in question depends on the type of firewall.

Also Read: How To Make Gmail Dark Mode

Types of Firewalls

Although they are all designed to prevent unauthorized access, the operating methods and general structure of firewalls can vary widely. Depending on their system, there are three types of firewalls: software firewalls, hardware firewalls, or both. The other types of firewalls on this list are firewall techniques that implement in hardware or software.

Software Firewalls

A software firewall installs on the congregation device. This type of firewall is also know as host firewall. Since it involves in a specific device, it must use its resources to function. Therefore, it is inevitable that part of the system’s RAM and processor use.

If you have many devices, you need to install the software on each device. Since it must be compatible with the host, each configures individually. Therefore, the main drawback is the time and knowledge requires to manage and manage the firewalls of each device.

Then again, the benefit of programming firewalls is that they can recognize programs while sifting approaching and busy traffic. Along these lines, they can deny admittance to one program while permitting admittance to another.

Also Read: Enhance Pointer Precision Windows 10

As the name recommends, equipment firewalls are security gadgets that are discrete bits of equipment set between an internal organization and an outside organization. This sort is likewise alluded to as an apparatus firewall.

In contrast to a product firewall, an equipment firewall has its assets and doesn’t devour CPU or RAM from having gadgets. It is an actual machine that goes about as an entryway for traffic to and from an internal organization.

They are used by intermediate and large organizations with multiple computers on the same network. In such cases, using hardware firewalls is more convenient than installing individual software on each device. Setting up and maintaining a hardware firewall requires knowledge and skills. So make sure that a qualified team takes on this responsibility.

Also Read: Why Networking Optimization is Important

Packet Filtering Firewall

When it comes to the types of firewalls based on how they work, the packet filter firewall is the most basic type. It serves as an online security barrier attached to a router or switch. As the name suggests, it displays network traffic by filtering incoming packets based on the information they carry.

Each data packet contains a header and the data it transmits. This type of firewall decides, based on header information, whether access to a box is allowed or denied. For this, the protocol, the source IP address, the destination IP, the source port and the destination port checks. Depending on the correspondence between the numbers and the ACL (rules that define desired / unwanted traffic), packets are forwarded or discarded

If a data packet does not meet all the required rules, it should not reach the system.

A packet filtering firewall is a quick fix that doesn’t require a lot of resources. However, it is not the safest. Although the header information is verified, the data (payload) itself is not verified. Since malware initiates in this section of the data packet, the packet filtering firewall is not the best option for increased system security.

Circuit Level Walkways

Line-level gateways are a type of firewall that works at the session-level of the OSI model and monitors TCP connections and sessions (Transmission Control Protocol). Their primary function is to ensure the security of existing relationships.

In most cases, circuit-level firewalls integrate into software or an existing firewall.

Like pocket-filtering firewalls, they do not check the actual data, but rather the transaction information. Also, line-level gateways are convenient, easy to configure, and do not require a separate proxy server.

Stateful Inspection Firewall

A stateful inspection firewall tracks the status of a connection by monitoring the 3-way TCP handshake. It allows the entire link to track from start to finish, leaving only the expected return traffic.

When starting a connection and when requesting data, stateful inspection creates a database (state table) and records the connection information. The source IP, source port, destination IP address, and destination port for each connection are shown in the status table. By using the stateful inspection method, firewall rules are dynamically creates to allow the expected data traffic.

This type of firewall uses additional security. It applies more controls and is more secure than stateless filters. Unlike stateless / packet filtering, however, stateful firewalls check the actual data transmitted over multiple packets instead of just headers. For this reason, they also require more system resources.

Proxy Firewall

A proxy firewall acts as an intermediate device between internal and external systems that communicate over the Internet. It protects a network by advancing requests from the original client and masquerading as its own. Proxy means acting as a substitute, and so that is the role it plays. It replaces the client sending the request.

New Generation Firewall

Next-Generation Firewall is a safety device that combines several functions of other firewalls. It includes packet, stateful and in-depth packet check-up. NGFW checks the actual load of the box instead of just focusing on the header information.

Unlike traditional firewalls, the next-generation firewall inspects the entire data transaction, including TCP handshakes, surface layer, and deep packet inspection.

Using NGFW provides adequate protection against malware attacks, external threats and intruders. These devices are very flexible, and there is no clear definition of the functions they offer. It is, therefore, essential to know more about the options.

Cloud Firewall

A cloud firewall as a service  is a cloud solution for network protection. Like other cloud solutions, it manages and executed by third parties over the Internet.

Customers often use cloud firewalls as proxy servers. However, the configuration can vary depending on your needs. Their main advantage is scalability. They are independent of physical resources, which means that the capacity of the firewall scales according to the traffic load.